MTB Cycling Lighting Systems

Note: The NiteRider® Lumina™ Pro 1000 is shipped from the factory in Travel Lock Out Mode. This mode feature is designed to save battery power by preventing the head light from accidentally turning on while in storage. Simply press and hold power button 8-10 seconds to lock / unlock.

Boasting 1000 lumens with a sleek form factor and a collimator lense that lends to a brilliant and even light beam pattern! NiteRider® makes this newcomer USB-C rechargeable for convenient on-the-go charging. A feature of note on the 1000 are color-coded light modes shown through the dual button power switch. Its light weight at 193 grams makes it quite suitable as a helmet mountable option as well as bar compatible—standard and oversized diameters. The Lumina™ Pro 1000 features a highly durable light housing with Fiberglass reinforced nylon meeting all required FL1 Standards for run times, impact testing and dust/water resistance.

Vmax+ 150 is NiteRider’s first taillight featuring COB (Chip-on-Board) LEDs, which for cyclists means it emits highly visible flash patterns in a smaller, more compact package. Its feather-like light weight makes it perfect as a wearable safety light—easily clipping onto straps, belt loops, and more! For added convenience, the Vmax+ 150 features mode memory, will power ON in the last mode used.

Includes: Lumina™ Pro 1000 front light, Vmax+™ 150 taillight, handlebar clamp mount, rubber seat post strap mount, USB-C charging cable, and USB charging cable.

LUMINA™ PRO 1000 FEATURES
• Lumen Output: 1000
• 8 Modes with Run Times: 1:00-21:00h
• Charge Time: 4:00h
• Weight: 193 grams
• Water / Dust Resistant IP64 Rated
• Dual Button Power Switch, Brighter (+)/ Dimmer (-)
• USB-C Rechargeable

VMAX+™ 150 FEATURES
• Lumen Output: 150
• 6 Modes with Run Times: 4:30-25:30h
• Charge Time: 2:00h
• Water / Dust Resistant IP64 Rated
• USB-C Rechargeable
• Mode Memory (Powers ON in last mode used)

LUMINA™ PRO 1000 RUN TIMES*
Low - 6:00h at 200 Lumens
Med - 3:30h at 300 Lumens
High - 1:30h at 750 Lumens
Boost - 1:00h at 1000 Lumens
Super Flash - 8:00h at 750 Lumens
Pulse Flash - 8:00h at 750 Lumens
Fast Flash - 8:00h at 750 Lumens
Walk Mode - 21:00h at 50 Lumens

Vmax+™ 150 RUN TIMES*
Fast Flash - 11:30h
Slow Flash - 9:30h
Disco Flash - 9:45h
Pulse Flash - 6:00h
High Steady - 4:30h
Low Steady - 25:30h

*Run times are approximations and may vary

! Warning Hot Surfaces !
Do not use the Lumina™ as a hand-held lighting device when in high and boost modes!

Note: The NiteRider® Lumina™ Micro 900 is shipped from the factory in Travel Lock Out Mode. This mode feature is designed to save battery power by preventing the head light from accidentally turning on while in storage. Simply press and hold power button 8-10 seconds to lock / unlock.

Producing 900 brilliant lumens, the NiteRider® Lumina™ Micro 900 is smaller, lighter, and more compact than the original Lumina™ series.

Vmax+™ 150 is NiteRider’s first taillight featuring COB (Chip-on-Board) LEDs, which for cyclists means it emits highly visible flash patterns in a smaller, more compact package. Its feather-like light weight makes it perfect as a wearable safety light—easily clipping onto straps, belt loops, and more. For added convenience, the Vmax+ 150 features mode memory, will power ON in the last mode used.

LUMINA™ MICRO 900 FEATURES
•  Lumen Output: 900
•  5 Modes with Run Times: 2:00 – 60:00h
•  Charge Time: 2:30h at greater than 500mA | 4:30h at 500mA
•  Weight: 130g
•  Low Battery Indicator and Micro USB Rechargeable
•  Water / Dust Resistant IP64 Rated

LUMINA™ MICRO 900 RUN TIMES*
Low - 11:00h at 200 Lumens
Med - 4:30h at 450 Lumens
High - 2:00h at 900 Lumens
Flash - 11:00h at 900 Lumens
Walk - 60:00h at 30 Lumens

Vmax+™ 150 TAILLIGHT FEATURES
• Lumen Output: 150
• 6 Modes with Run Times: 5:30-27:30h
• Charge Time: 2:00h
• Water / Dust Resistant IP64 Rated
• USB-C Rechargeable
• Mode Memory (Powers ON in last mode used)

Vmax+™ 150 RUN TIMES*
Fast Flash - 11:30h
Slow Flash - 9:30h
Disco Flash - 9:45h
Pulse Flash - 6:00h
High Steady - 4:30h
Low Steady - 25:30h

*Run times are approximations and may vary

Note: The NiteRider® Lumina™ Micro 650 is shipped from the factory in Travel Lock Out Mode. This mode feature is designed to save battery power by preventing the head light from accidentally turning on while in storage. Simply press and hold power button 8-10 seconds to lock / unlock.

Big things come in small packages and the NiteRider® Lumina™ Micro 650 is the proof. The Lumina™ Micro 650 delivers a powerful punch with 650 lumens of light output, helping you to safely navigate your ride.

Vmax+™ 150 is NiteRider’s first taillight featuring COB (Chip-on-Board) LEDs, which for cyclists means it emits highly visible flash patterns in a smaller, more compact package. Its feather-like light weight makes it perfect as a wearable safety light—easily clipping onto straps, belt loops, and more. For added convenience, the Vmax+ 150 features mode memory, will power ON in the last mode used.

LUMINA™ MICRO 650 FEATURES
•  Lumen Output: 650
•  5 Modes with Run Times: 2:00 – 50:00h
•  Charge Time: 2:30h at greater than 500mA | 4:30h at 500mA
•  Weight: 130g
•  Low Battery Indicator and Micro USB Rechargeable
•  Water / Dust Resistant IP64 Rated

LUMINA™ MICRO 650 RUN TIMES*
Low - 10:30h at 130 Lumens
Med - 4:30h at 325 Lumens
High - 2:00h at 650 Lumens
Flash - 12:30h at 650 Lumens
Walk - 50:00h at 40 Lumens

Vmax+™ 150 TAILLIGHT FEATURES
• Lumen Output: 150
• 6 Modes with Run Times: 4:30-25:30h
• Charge Time: 2:00h
• Water / Dust Resistant IP64 Rated
• USB-C Rechargeable
• Mode Memory (Powers ON in last mode used)

Vmax+™ 150 RUN TIMES*
Fast Flash - 11:30h
Slow Flash - 9:30h
Disco Flash - 9:45h
Pulse Flash - 6:00h
High Steady - 4:30h
Low Steady - 25:30h

*Run times are approximations and may vary

Note: The NiteRider® Swift™ 300 is shipped from the factory in Travel Lock Out Mode. This mode feature is designed to save battery power by preventing the head light from accidentally turning on while in storage. Simply press and hold power button 8-10 seconds to lock / unlock.

The Swift™ 300 gives you more than enough lumens at our lightest weight for headlights (82 grams). NiteRider® makes this headlight USB rechargeable for convenient on-the-go charging. The Swift™ 300 features a highly durable light housing with Dupont® Fiberglass reinforced nylon meeting all required FL1 Standards for impact testing and water / dust resistance.

Vmax+™ 150 is NiteRider’s first taillight featuring COB (Chip-on-Board) LEDs, which for cyclists means it emits highly visible flash patterns in a smaller, more compact package. Its feather-like light weight makes it perfect as a wearable safety light—easily clipping onto straps, belt loops, and more. For added convenience, the Vmax+ 150 features mode memory, will power ON in the last mode used.

SWIFT™ 300 FRONT LIGHT FEATURES
• Lumen Output: 300
• 5 Modes with Run Times: 2:00 – 28:00h
• Charge Time: 2:00h at greater than 500mA | 3:15h at 500mA
• Water / Dust Resistant IP64 Rated
• Micro USB Rechargeable

SWIFT™  300 TYPICAL RUN TIMES*
Low - 12:00h at 80 Lumens
Med - 5:00h at 150 Lumens
High - 2:00h at 300 Lumens
Flash - 12:00h at 300 Lumens
Walk - 28:00h at 20 Lumens

Vmax+™ 150 TAILLIGHT FEATURES
• Lumen Output: 150
• 6 Modes with Run Times: 4:30-25:30h
• Charge Time: 2:00h
• Weight: 59g
• Water / Dust Resistant IP64 Rated
• USB-C Rechargeable
• Mode Memory (Powers ON in last mode used)

Vmax+™ 150 TYPICAL RUN TIMES*
Fast Flash - 11:30h
Slow Flash - 9:30h
Disco Flash - 9:45h
Pulse Flash - 6:00h
High Steady - 4:30h
Low Steady - 25:30h

*Run times are approximations and may vary

Epro™ 1000 is NiteRider’s first headlight specifically made for electric bikes. It comes with pre-wired power line for connection to the eBike’s battery. Power line cable measures approximately 52" in length. Headlamp powers on with ignition switch. Features two modes—Steady ON and Pulse Flash—with Built-in Mode Memory (remembers last setting).

Emax+™ 150 is NiteRider’s first taillight specifically made for electric bikes. It comes with a power line that's pre-wired for connection to the eBike’s battery. Power line cable measures approximately 52" in length. Taillight powers ON with ignition/ power switch. Features six modes—Steady ON and varying flashes—with Built-in Mode Memory (remembers last setting).

EPRO™ 1000 FEATURES
• Lumen Output: 1000
• 2 Modes
• Hardwired, Voltage 12 to 40 Volts 1.2 amps at 12v, 300mA at 40 volts
• Water / Dust Resistant IP64 Rated
• Weight: 166 grams
• Fits 22mm-31.8mm seat posts
• Includes a pre-wired Epro™ 1000 Head Light, Handlebar Clamp Mount, and Rubber Mounting Shims

LIGHT MODES
1) Steady ON 
2) Pulse Flash 

Emax+™ 150 FEATURES
• Lumen Output: 150
• 6 Modes
• Hardwired, Voltage 6 to 80 Volts DC
• Water / Dust Resistant IP64 Rated
• Weight: 75 grams
• Fits 22mm-34.9mm seat posts
• Includes a pre-wired Emax+ 150 Taillight, Seat Post Clamp Mount, Rubber Mounting Shims, and Rack Mount

Emax+™ 150 LIGHT MODES
1) Fast Flash
2) Slow Flash
3) Disco Flash
4) Pulse Flash
5) High Steady
6) Low Steady

NiteRider® recommends this headlight be installed by an authorized e-bike service and repair shop.
Please reference your bike manufacturers manual for compatibility.
Epro™ 1000 Headlight not compatible with 6 Volt systems.

 Click to View / Download Epro™ 1000 / Emax+™ 150 Combo User Guide

Emax+™ 150 is NiteRider’s first taillight specifically made for electric bikes. It comes with a power line that's pre-wired for connection to the eBike’s battery. Power line cable measures approximately 52" in length. Taillight powers ON with ignition/ power switch. Features six modes—Steady ON and varying flashes—with Built-in Mode Memory (remembers last setting).

FEATURES
• Lumen Output: 150
• 6 Modes
• Hardwired, Voltage 6 to 80 Volts DC
• Water / Dust Resistant IP64 Rated
• Weight: 75 grams
• Fits 22mm-34.9mm seat posts
• Includes a pre-wired Emax+ 150 Taillight, Seat Post Clamp Mount, Rubber Mounting Shims, and Rack Mount

LIGHT MODES
1) Fast Flash 
2) Slow Flash 
3) Disco Flash 
4) Pulse Flash 
5) High Steady 
6) Low Steady

NiteRider® recommends this taillight be installed by an authorized e-bike service and repair shop.

 Click to View / Download Emax+™ 150 User Guide

To further rider safety and visibility, the BlueBomb CherryBomb™ 100 employs a custom made, built in reflector which allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included, for flexible mounting options.

For off-road use only.

BlueBomb CherryBomb™ 100 Taillight is a safety light that meets the safety requirements for SCORE International for all motorcycle and ATV classes.

Does not include helmet. Helmet mount SKU #4004 sold separately.

FEATURES
• 4 Modes with a Run Time up to 136h
• Weight: 82g
• Battery: 2 x AAA Alkaline
• Highly Visible Blue Light up to 1 Mile
• Water / Dust Resistant IP64 Rated

RUN TIME*
Fast Flash - 96:00h
Pulse Flash - 136:00h
Steady High - 72:00h
Steady Low - 127:00h

*Run time specifications may vary

With a 2200 lumen output, you’ll be sure to see every trail line, root, rut or rock with relative ease. The Pro 2200 Enduro spec includes an 8 cell battery for double the run times, when compared to the 2200 Race spec. The four steady light modes, two steady flashes and S.O.S. give you seven options for any adventure you decide upon.

MORE BELOW ↓

FEATURES
•  Lumen Output: 2200
•  7 Modes with Run Times: 3:00 – 50:00hrs
•  Charge Time: 5:00hrs
•  Weight: 702g
•  Battery: Li-Ion
•  8 Step Fuel Gauge
•  Handlebar and Helmet Mountable
•  Water / Dust Resistant IP64 Rated

RUN TIMES*
Low - 12:00h at 500 Lumens
Medium - 6:00h at 800 Lumens
High - 3:00h at 2200 Lumens
Flash - 50:00h at 730 Lumens
Beacon - 50:00h at 730 Lumens
S.O.S. - 50:00h at 730 Lumens 
Race - 50:00h at 250 Lumens

*Run times are approximations and may vary

INCLUDES
• 3-LED Headlamp
• 8 Cell Li-Ion Battery
• Helmet Mount
• Handlebar Mount – Fits up to 35mm
• 36” Extension Cable
• AC Adapter
• Nylon Storage Pouch

View / Download Pro 2200 Enduro User Guide Spec Sheet 

With a 3600 lumen output, you’ll be sure to see every trail line, root, rut or rock with relative ease. But sometimes you don’t need max light output and you need to save your 8 Cell Li-ion battery’s life for more technical terrain, in which case NiteRider® has you covered with an ergonomically friendly remote switch allowing you to cycle through the flash and four steady light modes.

MORE BELOW ↓

FEATURES
• Lumen Output: 3600
• 7 Modes with Run Times: 1:30 – 21:00hrs
• Charge Time: 5:00hrs
• Weight: 839g
• Battery: Li-Ion
• 8-step Fuel Gauge
• Remote Switch, easy thumb operation
• Water / Dust Resistant IP64 Rated

RUN TIMES*
Low - 6:00h at 1000 Lumens
Medium - 3:30h at 1800 Lumens
High - 1:30h at 3600 Lumens
Flash - 15:00h
Pulse - 11:00h
S.O.S. - 21:0h 
Race - 16:30h at 450 Lumens

*Run times are approximations and may vary

Featuring a custom engineered 'triple-cone' reflector housing 3 high-performance LEDs. The Pro 1800 Race outputs 1800 lumens, you’ll be sure to see every trail line, root, rut or rock with relative ease. If features an accurate eight step fuel gauge, keeping the rider informed of the 4-cell battery levels at all times.

MORE BELOW ↓

FEATURES
•  Lumen Output: 1800
•  7 Modes with Run Times: 1:30 – 25:00hrs
•  Charge Time: 5:00hrs
•  Weight: 484g
•  Battery: Li-Ion
•  8 Step Fuel Gauge
•  Triple-cone reflector w/ 3 LEDs
•  Handlebar and Helmet Mountable
•  Water / Dust Resistant IP64 Rated

RUN TIMES*
Low - 6:00h at 400 Lumens
Medium - 3:00h at 700 Lumens
High - 1:30h at 1800 Lumens
Flash - 25:00h
Beacon - 25:00h
S.O.S. - 25:00h
Walk - 25:00h at 80 Lumens

*Run times are approximations and may vary

INCLUDES
• 3-LED Headlamp
• 4 Cell Li-Ion Battery
• Helmet Mount
• Handlebar Mount – Fits up to 35mm
• 36” Extension Cable
• AC Adapter
• Nylon Storage Pouch

View / Download Pro 1800 Race User Guide

Engineered with custom optics, the reflector helps project 1400 lumens from a single high-powered LED. 
Destined to be the gold standard in versatility, the Pro 1400 Race is equally at home on your helmet or on your handlebars. Off-road and road riders alike will appreciate its small size and weight which come at no sacrifice to durability and performance.

MORE BELOW ↓

FEATURES
•  Lumen Output: 1400
•  7 Modes with Run Times: 2:00 – 32:45hrs
•  Charge Time: 5:00hrs
•  Weight: 484g
•  Battery: Li-Ion
•  8 Step Fuel Gauge
•  Single High Performance LED
•  Handlebar and Helmet Mountable
•  Water / Dust Resistant IP64 Rated

RUN TIMES*
Low - 9:30h at 400 Lumens
Medium - 3:45h at 850 Lumens
High - 2:00h at 1400 Lumens
Flash - 32:45h
Beacon - 32:45h
S.O.S. - 32:45h
Walk - 32:45h at 125 Lumens

*Run times are approximations and may vary

INCLUDES
• LED Headlamp
• 4 Cell Li-Ion Battery
• Helmet Mount
• Handlebar Mount – Fits up to 35mm
• 36” Extension Cable
• AC Adapter
• Nylon Storage Pouch

View / Download Pro 1400 Race User Guide Spec Sheet